Fonte de alimentação Poe Industrial Din Rail, adaptador de energia POE de 240 watts, IES7211-P240-48V

Especificação

• MODELO :

  IES7211-P240-48V

• SAÍDA :

  *

• TENSÃO CC :

  48V

• CORRENTE NOMINAL :

  5A

• FAIXA ATUAL :

  0 ~ 5A

• POTÊNCIA NOMINAL :

  240W

• ONDULAÇÃO E RUÍDO (máx.) Nota.2 :

  150mVp-p

• TENSÃO AJ. FAIXA :

  48 ~ 55V

• TOLERÂNCIA DE TENSÃONota.3 :

  ±1.0%

• REGULAÇÃO DE LINHA :

  ±0.5%

• REGULAÇÃO DE CARGA :

  ±1.0%

• CONFIGURAÇÃO, TEMPO DE LEVANTAMENTO :

  1500ms, 100ms/230VAC; 3000ms, 100ms/115VAC at full load

• HOLD UPTIME (Tip.) :

  28ms/230VAC; 22ms/115VAC at full load

• ENTRADA :

  *

• FAIXA DE TENSÃO Nota.6 :

  90 ~ 264VAC; 127 ~ 370VDC

• FAIXA DE FREQUÊNCIA :

  47 ~ 63Hz

• EFICIÊNCIA (Tip.) :

  90%

• CORRENTE AC (Tip.) :

  2.5A/115VAC; 1.3A/230VAC

• CORRENTE DE INRUSH (Typ.) :

  20A/115VAC; 35A/230VAC

• CORRENTE DE FUGA :

  <1mA/ 240VAC

• PROTEÇÃO :

  *

• SOBRECARGA :

  105 ~ 130% rated output power [Protection type :Constant current limiting, recovers automatically after fault condition is removed]

• SOBRETENSÃO :

  56 ~ 65V [Protection type : Shut down o/p voltage, re-power on to recover]

• SOBRE TEMPERATURA :

  Shut down o/p voltage, recovers automatically after temperature goes down

• AMBIENTE :

  *

• TEMPERATURA DE TRABALHO. :

  -20 ~ +70 (Refer to "Derating Curve")

• UMIDADE DE TRABALHO :

  20 ~ 95% RH non-condensing

• TEMPERATURA DE ARMAZENAMENTO, UMIDADE :

  -40 ~ +85 , 10 ~ 95% RH

• TEMPERATURA. COEFICIENTE :

  士0.03%/℃(0-50℃)

• VIBRAÇÃO :

  Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X,Y, Z axes; Mounting: Compliance to IEC60068-2-6

• SEGURANÇA E EMC (Nota 4) :

  *

• NORMAS DE SEGURANÇA :

  UL508,TUV BS EN/EN62368-1, ,EAC TP TC 004 BSMI CNS14336-1, , BIS IS13252(Part1): 2010/IEC 60950-1:2005(NOTE 8),KC K60950-1(for 48V only)approved; (meet BS EN/EN60204-1)

• SUPORTAR TENSÃO :

  I/P-O/P:3KVAC; I/P-FG:2KVAC; O/P-FG:0.5KVAC

• RESISTÊNCIA DE ISOLAMENTO :

  I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH

• EMISSÃO CEM :

  Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2,-3,EAC TP TC 020, CNS13438, KSC 9832(for 48V only)

• IMUNIDADE CEM :

  Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11,BS EN/EN55035,BS EN/EN61000-6-2(BS EN/EN50082-2),BS EN/EN61204-3, heavy industry level, EAC TP TC 020,KSC 9835(for 48V only)

• OUTROS :

  *

• MTBF :

  1645.2K hrs min. Telcordia SR-332 (Bellcore) ; 230.2K hrs min. MIL-HDBK-217F (25℃)

• DIMENSÃO :

  63*125.2*113.5mm (W*H*D)

• EMBALAGEM :

  1Kg; 12pcs/13Kg/1.22CUFT

• NOTA 1 :

  All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

• NOTA 2 :

  Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 μ F & 47 μ F paralel capacitor.

• NOTA 3 :

  Tolerance : includes set up tolerance, line regulation and load regulation.

• NOTA 4 :

  Derating may be needed under low input voltage. Please check the derating curve for more details.

• NOTA 5 :

  Installation clearances : 40mm on top, 20mm on the botom, 5mm on the left and right side are recommended when loaded permanently with full power. In case the adjacent device is a heat source, 15mm clearance is recommended.

• NOTA 6 :

  The power supply is considered a component which wil be instaed into a final ecuioment. For guidance on how to perform these EMC tests, please refer to "EMl testing of component power supplies."

• NOTA 7 :

  The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operaing altitude higher than 2000m(6500ft).

• Tipo de Negócio :

  Industrial